The Bronneberg Forfex-400 alligator shear is equipped with 400 mm blades. This hydraulic alligator shear is the ideal machine when it comes to cleaning light and medium non-ferrous metals. In addition, this Bronneberg shear can be used to shear ferrous metals such as concrete bars and common steels as well.

Features

Engine power: Electric 400 Volt – 7.5 kW

Cutting capacity (solid steel): Ø 40 mm (St 37)

Blade length: 400 mm

Maximum opening at the end of the blades: max. 250 mm

Dimensions: 1,750 x 700 x 1,500 mm

Weight : 750 KG

This easy to operate and maintain equipment is equipped with a mechanically adjustable pre-compression operating with a protective cover on the cutting head. The pre-compression prevents material from falling and guarantees the safety of the operator.

The shearing head is operated using a foot control for single or continuous cuts. The shearing opening can be simply adjusted by changing the position of the limit switch. In order to optimize operator safety, the shear immediately returns to its starting position when the operator removes his foot from the pedal.

The Bronneberg Forfex-500 alligator shear is equipped with 500 mm blades. This hydraulic alligator shear is the ideal machine when it comes to cleaning light and medium non-ferrous metals. In addition, this Bronneberg shear can be used to shear ferrous metals such as concrete bars and common steels as well.

Features

Engine power: Electric 400 Volt – 7.5 kW

Cutting capacity (solid steel): Ø 40 mm (St 37)

Blade length: 500 mm

Maximum opening at the end of the blades: max. 280 mm

Dimensions: 1,850 x 700 x 1,500 mm

Weight : 850  KG

This easy to operate and maintain equipment is equipped with a mechanically adjustable pre-compression operating with a protective cover on the cutting head. The pre-compression prevents material from falling and guarantees the safety of the operator.

The shearing head is operated using a foot control for single or continuous cuts. The shearing opening can be simply adjusted by changing the position of the limit switch. In order to optimize operator safety, the shear immediately returns to its starting position when the operator removes his foot from the pedal.

The Bronneberg Forfex-600 alligator shear is equipped with 600 mm blades. This hydraulic alligator shear is the ideal machine when it comes to cleaning radiators or other aluminum and copper coolers. In addition, this Bronneberg shear can be used to shear a wide variety of non-ferrous metals. However, this shear is also capable of shearing concrete bars or other common steel bars.

Features

Engine power: Electric 400 Volt – 7.5 kW

Cutting capacity (solid steel): Ø 40 mm (St 37)

Blade length: 600 mm

Maximum opening at the end of the blades: max. 302 mm

Dimensions: 1,950 x 700 x 1,530 mm

Weight : 950 KG

This easy to operate and maintain equipment is equipped with a mechanically adjustable pre-compression operating with a protective cover on the cutting head. The pre-compression prevents material from falling and guarantees the safety of the operator.

The shearing head is operated using a foot control for simple cuts. The shearing opening can be simply adjusted by changing the position of the limit switch. In order to optimize operator safety, the shear immediately returns to its starting position when the operator removes his foot from the pedal.
Continuous cutting cycles are also possible when the operator leaves pressure on the control pedal.

These small crocodile shears are ideal for light cutting and are very easily transportable.

Features

Engine power: Electric 400 Volt – 5.5 kW

Cutting capacity (solid steel): Ø 18 mm (St 37)

Blade length: 200 mm

Maximum opening at the end of the blades: max. 130 mm

Dimensions: 800 x 800 x 1,100 mm

Weight : 145 KG

The PowerBird is equipped with an adjustable translucent safety hood, a fully automatic working mode or by cutting cycle operated using a control pedal.
Emergency stops on the control pedal and machine body activating separate emergency stop circuits.
Forklift grip points for easy machine movement. Safe, Quiet and Beautiful.

Features

Engine power: Electric 400 Volt – 7.5 kW

Cutting capacity (solid steel): Ø 50 mm (St 37)

Blade length: 500 mm

Maximum opening at the end of the blades: 280 mm

Dimensions: 2,300 x 1,000 x 1,600 mm

Weight : 1,300 kg

The A400E crocodile shears are equipped with a mechanically adjustable pre-compression. The shear head is driven by a foot pedal for single or continuous cutting. The shear opening can be simply adjusted using the limit switches. The movable shear head is protected by a cage housing.

Features

Engine power: Electric 400 Volt – 7.5 kW

Cutting capacity (solid steel): Max. Ø 45 mm

Blade length: 400 mm

Maximum opening at the end of the blades: max. 240 mm

Dimensions: 1,600 x 1,000 x 1,600 mm

Weight : 1.075 Kg

• Adjustable blade opening and cutting speed
• Maximum security
• Operator protection
• Low noise level
• Low maintenance

The A-600E crocodile shears are equipped with hydraulic pre-compression.
The shear head is operated using a foot pedal for single or continuous cutting.
If the shear is to operate on heavy materials, a more robust HD version is available with a larger hydraulic power unit and oil cooling.

Features

Engine power: Electric 400 Volt – 18.5 / 22 kW

Cutting capacity (solid steel): Ø 75 mm (st37)

Blade length: 600 mm

Maximum opening at the end of the blades: max. 302 mm

Dimensions: 2,600 x 1,500 x 1,600 mm

Weight : 3.800 Kg

Designed for cutting aluminum ingots.
Equipped with a safety table.
Ideal for cutting large materials.

• Maximum security
• Operator protection
• Adjustable cutting speed
• Adjustable blade opening
• Hydraulic maintenance
• Low noise level
• Low maintenance